ds27003 rev. 7 - 3 1 of 3 www.diodes.com pr3001g - pr3007g ? diodes incorporated not recommended for new design pr3001g - pr3007g 3.0a fast recovery gla ss passivated rectifier features ? glass passivated die construction ? fast switching for high efficiency ? surge overload rating to 125a peak ? low reverse leakage current ? lead free finish, rohs compliant (note 4) mechanical data ? case: do-201ad ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020c ? terminals: finish ? tin. plated leads solderable per mil-std-202, method 208 ? polarity: cathode band ? marking: type number ? ordering information: see page 3 ? weight: 1.12 grams (approximate) do-201ad dim min max a 25.40 ? b 7.20 9.50 c 1.20 1.30 d 4.80 5.30 all dimensions in mm maximum ratings and electrical characteristics @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol pr 3001g pr 3002g pr 3003g pr 3004g pr 3005g pr 3006g pr 3007g unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 5) v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectified output current (note 1) @ t a = 55 c i o 3.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 125 a forward voltage @ i f = 3.0a v fm 1.3 v peak reverse current @ t a = 25 c at rated dc blocking voltage (note 5) @ t a = 125 c i rm 5.0 100 a reverse recovery time (note 3) t rr 150 250 500 ns typical total capacitance (note 2) c t 50 pf typical thermal resistance junction to ambient r ja 32 c/w operating and storage temperature range t j, t stg -65 to +150 c notes: 1. valid provided that leads are maintained at am bient temperature at a distance of 9.5mm from the case. 2. measured at 1.0mhz and appl ied reverse voltage of 4.0v dc. 3. measured with i f = 0.5a, i r = 1a, i rr = 0.25a. see figure 5. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. 5. short duration pulse test used to minimize self-heating effect.
ds27003 rev. 7 - 3 2 of 3 www.diodes.com pr3001g - pr3007g ? diodes incorporated not recommended for new design 0 1 2 3 4 0 2550 75100125150175 i, ave r a g e f o r wa r d r e c t i f ied current (a) (av) t , ambient temperature (c) fig. 1 forward derating curve a single phase half wave resistive or inductive load 0.01 0.1 1.0 10 0.6 0.8 1.0 1.2 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics f t = 25c j 10 100 200 11 01 0 0 i, p eak f o r wa r d s u r g e c u r r en t (a) fsm number of cycles at 60 hz fig. 3 peak forward surge current 1 10 100 11 01 0 0 c , t o t al c a p a c i t a n c e (p f ) t v , reverse voltage (v) fig. 4 typical total capacitance r
ds27003 rev. 7 - 3 3 of 3 www.diodes.com pr3001g - pr3007g ? diodes incorporated not recommended for new design ordering information (note 6) device packaging shipping pr3001g-b do-201ad 500/bulk pr3001g-t do-201ad 1.2k/tape & reel, 13-inch pr3002g-b do-201ad 500/bulk pr3002g-t do-201ad 1.2k/tape & reel, 13-inch pr3003g-b do-201ad 500/bulk pr3003g-t do-201ad 1.2k/tape & reel, 13-inch pr3004g-b do-201ad 500/bulk pr3004g-t do-201ad 1.2k/tape & reel, 13-inch pr3005g-b do-201ad 500/bulk PR3005G-T do-201ad 1.2k/tape & reel, 13-inch pr3006g-b do-201ad 500/bulk pr3006g-t do-201ad 1.2k/tape & reel, 13-inch pr3007g-b do-201ad 500/bulk pr3007g-t do-201ad 1.2k/tape & reel, 13-inch notes: 6. for packaging details, visit our we bsite at http://www.diodes .com/datasheets/ap02008.pdf. important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com
|
